MacroSystem Bogart SE Ver.4 User manual - Manual (Page 94)

94 Appendix
9) Advanced title selection
Only available with remote control: This prompts a choice of
chapters, angles and time input . You can use the direction
buttons to navigate to the desired title and confirm with OK (to
play) .
10) Advanced chapter selection
Only available with remote control: This prompts a choice of all
chapters of all films available on the DVD .
aA) Short fast forward
A jump forward, of about 10 seconds .
2.1.5 DVD options
Without having to enter the DVD main menu, you can access
some settings directly, even while the DVD is playing:
1) Audio track
Choose from the available audio tracks (e .g . multi-channel
sound, Dolby Digital 2 .0, Dolby Digital 5 .1, etc .) .
2) Subtitles
Activate and deactivate subtitles .
3) Angle
Enter the angle view for the DVD playback . Only available on
some DVDs . The second number represents the number of
available angles . A ‘1’ means that there is only one angle, i .e .
no extra angles are available .
4) Open/close tray
Press here to open the tray and eject the medium .
2.1.6 DVD information
Press the Info button to see the information panel at the bot-
tom of the screen during playback . The panel contains infor-
mation about the selected title (for example, 1/3 meaning that
you are watching title 1 of 3), the current chapter (from the
currently active title), available sub-titles, audio format, title
length, and angle (on some DVDs, you can watch a scene from
multiple angles . If this is not possible, it will display 1/1) . The
top right of the screen shows the running time of the current
title . Press 1 (switch time display) to switch between four dif-
ferent options: Passed title and chapter time and remaining
running time for title and chapter . Remaining time is shown
with a minus sign . Press button 2 to go to the second informa-
tion panel with resolution, aspect ratio, display and bit rate for
video and audio .
2.1.7 Main menu of the DVD
For the help menu, press the ‘DVD’ button to go to the main
menu of the DVD, ready for playback .
2.1.8 Title menu of the DVD
the remote or type the number using the number pad on the
screen (via trackball) . Confirm with OK . The menu will close;
the Navigation options too will disappear .
2) Menu selection
This allows you to directly access the menus on the DVD (for
example the title and main menu) .
3) Time access
This prompts a small area for entering the time . Use the re-
mote’s number block or use the trackball to click into the area
and then enter the numbers . This is used if you want to access
a certain point on the DVD directly, for example enter 45 to
jump to the 45th minute .
4) Return to Title
This continues the playback from the last position .
5) Start main movie
This will start the main movie on the DVD . It will use your set-
tings for language and subtitles, or the standard settings .
6) Restart
This initiates a complete restart of the DVD . This may (depends
on the DVD) include any proof of age , copyright, trailer or
menu sections .
7) Slow-Motion
The DVD is played in slow-motion . The top left corner displays
the slow-down factor . If you want to return to the original play-
back speed, press point -7, (replay) .
8) Replay
This immediately replays a certain part of the film and contin-
ues playback from there . The point in time used for the replay
can be defined too: Go to the main menu, then ‘Settings’ (User
Interface, General) and then set the ‘Replay time’ (see chapter
3 .2 .3 (Media Manager)) . If you set up 10 seconds for instance,
the film will ‘jump’ back 10 seconds and play from there .