Map modbus, smnp and bacnet slave units – RLE FMS V.1.13 User Manual
Page 120
Advertising
120
FMS User Guide
800.518.1519
3
Web Interface Configuration
Map Modbus, SMNP and BACnet Slave Units
Modbus and SNMP Slave Units are mapped just like analog and digital inputs.
1
From the FMS home page, go to Configuration>Modbus/SNMP Slave Units. All of your
previously configured points will display.
Figure 3.62
Modbus/SNMP/BACnet Slave Unit Configuration Screen
2
Click on the number of the unit you wish to map. This will take you to the Configuration
page for that device.
Figure 3.63
Map a Slave Input
Advertising