RLE FMS V.1.13 User Manual
Page 214
214
FMS User Guide
800.518.1519
G
Relay Control Logic
Inverter Gate
This gate can invert the relay activation. This allows the relay to be used in a “supervised”
mode. In this mode, if the FMS loses power, the relay will close. The gate is configured on
each relay configuration page.
Schedule
Each relay can be activated by either of the two schedules in the FMS. During the scheduled
time-of-day the relay is activated. The schedule option is configured on each relay
configuration page.
Keypad
Each relay can be controlled by a 3x4 keypad instead of the alarm inputs. The keypad option is
configured on each relay configuration page.
DTMF
Each relay that can be programmed to be controlled by the keypad can also be controlled from
a DTMF signal received on the phone line.
Force On/Off
Each relay can be forced to ON or OFF. This will override any alarm or keypad control of that
relay until the relay operation has been restored.