RLE FMS V.1.13 - Manual (Page 167)

rletech.com FMS User Guide 167
C
H A P T E R
C HAPTER 0
R
EMOTE
A
CCESS
6.1. Remote Access Configuration
The FMS can be remotely accessed with any terminal emulation software package. To
establish a proper dial-out session, set the appropriate modem port as follows:
♦ 33.6K baud
♦ NO parity
♦ 8 bits
♦ 1 stop bit
♦ (2400/N/8/1)
♦ No software or hardware flow control
Once the proper settings are made, dial the phone number assigned to the FMS. Once
communication is established, press Enter. A login prompt displays on the screen. Leave the
username field blank. Type the password and press Enter. The session begins.
Note The factory default password is
rletech
(case-sensitive).
Type a question mark (?) to view the Help Menu. To terminate the session, execute the
command in the software package that disconnects the modem. The commands for accessing
the system remotely are identical to the ones described in 2.3.1, “Set the FMS IP Address” on
page 35 .