RLE FMS V.1.13 - Manual (Page 171)

rletech.com FMS User Guide 171
C
H A P T E R
C HAPTER 0
L
OAD
F
IRMWARE AND
C
ONFIGURATION
D
ATA
8.1. Load FMS Firmware
You can download current versions of firmware from RLE’s web site at www.rletech.com. It
is important to confirm the correct version of firmware before downloading and installing it.
The FMS MAC ID is printed on a sticker on the bottom of the unit. FMS units with MAC IDs
00.90.5B.02.00.00 and above accept different firmware than other Falcons.
♦ FMS8002, 8126, and 2006 Falcons support firmware version 5.x only
♦ FMS8, 20, 20U and FMS32 Falcons support firmware version 6.x only.
♦ FLS8 and FLS8-M (Falcon Lite), and F-Series support firmware version 2.x only.
♦ FMS-X/FMS-XXXX with bootloader 7.x.x support firmware version 7.x only.
♦ FMS-X/FMS-XXXX With Bootloader 2.x.x supports firmware version 8.3.x only.
♦ FMS-X/FMS-XXXX With Bootloader 3.x.x supports firmware version 8.4.x only.
DO NOT ATTEMPT TO LOAD THE WRONG FIRMWARE ONTO THE FMS. If
you have any questions regarding firmware compatibility, visit our FMS web page
at www.rletech.com or call us directly.
The firmware load procedure involves using the MIME (multipurpose Internet mail
extensions) standard from the FMS web interface. To load firmware to the FMS:
8.1.1 Load Firmware Through the Web Interface
1 Go to the FMS support page on RLE’s website: http://www.rletech.com/support/FMS .
2 Firmware (a .bin file) is on the Downloads tab. Using the same filename, save the firmware
to a local disk.
W
ARNING