RLE FMS V.1.13 - Manual (Page 162)

162 FMS User Guide 800.518.1519
5 EIA-232 Interface
5.2. Flash Executable Code
After the boot up sequence, the main program executes from Flash memory. In order to run
properly, the unit must have a unique MAC address (assigned by the manufacturer) and an IP
address. The factory default for the IP address is
10.0.0.188
. If the unit is connected to the
enterprise's network, an IP address must be obtained from the network administrator. The
FMS must be reconfigured with this new IP address. This reconfiguration can be done in the
field; see the Table 5.1 .
Once the system reaches this point, press Enter to display the System Main Menu.
5.3. Main Menu
All system functions begin in the Main Menu. Users can display information, execute
commands and display submenus for additional inquiry and system configuration functions.
Command Description Function
netcfg
Network
Configuration
netcfg
displays the current MAC address, IP address,
subnet mask, default gateway. Users can set the MAC
address, IP address, Subnet mask, default gateway, ping,
network debug, network statistics, arp table, mail trace1,
mail trace2 and test email.
time
Display Date/
Time
time
displays the FMS current time and date. To enter the
time manually, type time one space then the current time in
24 hour format, including the seconds; e.g., hh:mm:ss
date
Display Date/
Time
date
displays the FMS current time and date. To enter the
date manually, type date one space then the current time
date; e.g., mm/dd/yy.
reset
bootloader
Menu
reset
displays the FMS bootloader menu. The options are
mac, ip, nm, dg, nd, ns, arp, ping, time, date, reset, id,
blank, erase prgm, load prgm xmodem, erase saX, run,
diag and rlyx.
id
Firmware
Identification
id
displays the FMS unit name, firmware file name and file
size.
Table 5.1 EIA-232 Main Menu