Figure a.7, Expansion card final placement in a two-rack unit – RLE FMS V.1.13 User Manual
Page 183
Advertising
rletech.com
FMS User Guide
183
A
FMS Expansion Cards
c
Secure the card to the lid using the five mounting screws supplied
.
Figure A.7
Expansion Card Final Placement in a Two-Rack Unit
7
If you are finished installing expansion cards:
a
Hinge the lid back in place over the base.
b
Reattach the side brackets using the two mounting screws on the back plate and the hex
posts for COM1 and COM2.
Advertising