Super Systems 9130 Series - Manual (Page 40)

Series 9130 Operations Manual Rev - 39
This is the open TC value. The options are: up scale, down scale, one trip point, and two trip points.
Input Offset
The input offset value is algebraically added to the input value to adjust the input curve on read-out. The
range is –32768 to 32767.
Scaling
This is the scaling value. The options are: Linear Microns, Log Torr, or Auto Scale.
Trip Point 1 Setpoint
This is the trip point 1 setpoint value. The range is –32768 to 32767.
Trip Point 1 Force Value
This is the trip point 1 force value. The range is –32768 to 32767.
Trip Point 1 Direction
This is the trip point 1 direction. The options are: input above setpoint or input below setpoint.
Trip Point 2 Setpoint
This is the trip point 2 setpoint value. The range is –32768 to 32767.
Trip Point 2 Force Value
This is the trip point 2 force value. The range is –32768 to 32767.
Trip Point 2 Direction
This is the trip point 2 direction. The options are: input above setpoint or input below setpoint.
High Input Limit Setpoint
This is the setpoint for the high input limit. The range is –32768 to 32767.
High Input Limit Hysteresis
This is the hysteresis for the high input limit. The range is –32768 to 32767.
Custom Curve
This will allow the user to set the custom curve to use. The curves are set up through the C
urve Entry
menu option. The options are: None, Curve 1 – Curve 3.
T/C Correction Curve
This will allow the user to set the T/C correction curve to use. The curves are set up through the
T/C
Correction Curves menu option. The options are: None, Curve 1 – Curve 3.
The Return button will return the user to the menu screen.