Super Systems 9130 Series - Manual (Page 61)

Series 9130 Operations Manual Rev - 60
Chapter 3 – Configurator 2.0 Menus
The following section will detail the menus that are found with the Configurator 2.0 software for the 9130
controller.
Slave Instruments
This page is a display of the current process
variables of each of the slave instruments
communicating with the 9130 controller.
Note –
None of these values can be modified on this
screen
.
For set-up of the auxiliary instruments go to the
menu item “
Slave Instrument Setup ”
Auxiliary Analog Input
This menu option shows the process variables for
the 3 analog inputs of the 9130 vacuum controller.
It also shows the input types and any information
from attached slave analog input modules.
Note –
None of these values can be modified on this
screen
.