Super Systems 9130 Series - Manual (Page 92)

Series 9130 Operations Manual Rev - 91
The maximum length of a program line is thirty-one (31) characters.
The following are the valid mathematical operators: + (Addition), - (Subtraction), * (Multiplication), /
(Division), and % (Modulo Divide – integer only).
The difference between Division and Modulo Division is that Modulo will always return an integer value.
Example:
11 / 4 = 2.75
11 % 4 = 2 (The .75 will not be returned)
Calculation Time (0 = Disabled)
This is the calculation time for the calculations. This will specify the delay between executing a line. Each
line has the same delay between them, even if they are blank. A value of zero (0) will keep the calculations
from being performed. The range is 0 – 10000.
Configure Instrument Calculations
This option will display the screen where the calculations can be entered. There are two ways to enter the
calculations, through the
Instrument Calculation screen, or with the Button View screen.
The Button View screen will allow the user to use buttons to enter the program lines. Only the buttons that
can currently be used will be enabled. On the Instrument Calculation screen, prompts will show up to help
the user enter the program lines correctly.