Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 228)

Checking and Deleting Multiple Exposures During
Shooting
To view the multiple-exposure image so far, check exposure, and see how the images are
merged, you can press the <
> button before you finish shooting your specified number
of exposures (when [ On:Func/Ctrl ] is set, but not with [ On:ContShtng ]).
Pressing the < > button will display the operations possible during multiple-exposure
shooting.
Option Description
Return to previous
screen
The screen before you pressed the < > button will reappear.
Undo last image
Deletes the last image you shot (enabling you to replace it by shooting again).
The number of remaining exposures will increase by 1.
Save and exit
With [ Save source imgs : All images ], saves all single exposures and the
multiple-exposure image created so far and exits multiple-exposure shooting.
With [
Save source imgs : Result only ], saves only the multiple-exposure
image created so far and exits multiple-exposure shooting.
Exit without saving
Exits the multiple-exposure shooting without saving the image.
Caution
During multiple-exposure shooting, you can only play back multiple-exposure
images.
FAQ
Are there any restrictions on the image quality?
All single exposures and the multiple-exposure image are captured at your specified
image quality.
Can I merge images recorded on the card?
With [ Select image for multi. expo. ], you can select the first single exposure from the
images recorded on the card ( ). Note that you cannot merge multiple images already
recorded on the card.
228