Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens User Manual
Page 747
The flash always fires at full output.
Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full
output (
).
When the flash Custom Function setting for [
Flash metering mode
] is set to [
TTL flash
metering
] (autoflash), the flash will always fire at full output (
).
Flash exposure compensation cannot be set.
If flash exposure compensation is already set with the Speedlite, flash exposure
compensation cannot be set with the camera. When the Speedlite's flash exposure
compensation is canceled (set to 0), flash exposure compensation can be set with the
camera.
High-speed sync is not available in [
] or [
] mode.
Set [
Slow synchro
] in [
:
External Speedlite control
] to an option other than [
1/250
sec. (fixed)
] (or [
1/200 sec. (fixed)
] ) (
).
Remote control shooting is not possible.
In still photo shooting, set the drive mode to [
] or [
] (
).
Check the position of the remote control's release timing switch.
If you are using Wireless Remote Control BR-E1, see
Connecting to a Wireless Remote Control
Infrared remote controllers such as the RC-6 cannot be used for remote control shooting
when the camera is paired via Bluetooth with a smartphone or wireless remote control.
Set [
Bluetooth settings
] to [
Disable
].
A white [ ] or red [ ] icon is displayed during shooting.
It indicates that the camera's internal temperature is high. Image quality of still photos
may be worse when a white [
] icon is displayed. Display of a red [
] icon indicates
that shooting will soon stop automatically (
).
747