Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 556)

Auto Retry If Transfer Fails
If transfer fails, the camera's access lamp blinks in red. In this case, the following screen is
displayed after you press the <
> button and select [ : Wi-Fi/Bluetooth
connection ].
To resolve the error displayed, see the troubleshooting information ( ).
Once you have resolved the issue, the images that could not be sent initially will be
transferred automatically. With this option activated, transfer is attempted again
automatically after failure, whether automatic transfer is used or captured images are
transferred manually via FTP. Note that if you cancel transfer or turn the camera off, auto
retry is not attempted.
See
Transferring Multiple Images at Once and transfer images as needed.
Note
To automatically log off and end the Wi-Fi connection after transfer, you can
configure power-saving on the [
FTP transfer settings ] screen ( ).
If you prefer not to end the Wi-Fi connection, set [ Power saving ] on the [ FTP
transfer settings ] screen ( ) to [ Disable ].
556