Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 745)

The continuous shooting speed is slow.
High-speed continuous shooting may be slower depending on the battery level, ambient
temperature, flicker reduction, shutter speed, aperture value, subject conditions,
brightness, AF operation, type of lens, use of flash, shooting settings, and other
conditions. See
Selecting the Drive Mode or Still photo file size / Number of possible
shots / Maximum burst for continuous shooting for details on file size, number of shots
available, maximum burst, and other estimated values.
The maximum burst during continuous shooting is lower.
Shooting intricate subjects such as fields of grass may result in larger file sizes, and the
actual maximum burst may be lower than the guidelines in
Still photo file size / Number
of possible shots / Maximum burst for continuous shooting .
Even after I change the card, the maximum burst displayed for
continuous shooting does not change.
Estimated maximum burst indicated in the viewfinder does not change when you switch
cards, even if you switch to a high-speed card. Maximum burst listed in
Still photo file
size / Number of possible shots / Maximum burst for continuous shooting is based on
the standard Canon test card, and the actual maximum burst is higher for cards with
faster writing speeds. For this reason, estimated maximum burst may differ from actual
maximum burst.
High-speed display is not available during high-speed continuous
shooting.
Refer to the high-speed display requirements in High-Speed Display .
Some image quality options are not available with cropped shooting.
/ / / image quality options are not available when [ 1.6x (crop) ] is set, or
with EF-S lenses.
The aspect ratio cannot be set.
Aspect ratios cannot be set for EF-S lenses ([ 1.6x (crop) ] is set automatically).
Aspect ratios cannot be set when [ : Add cropping information ] is set to an option
other than [ Disable ].
ISO 100 cannot be set for still photo shooting.
The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone
priority ] is set to [ Enable ] or [ Enhanced ].
745