Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 96)

Minimizing blurred photos
Use a sturdy tripod that can bear the weight of the shooting equipment. Mount the
camera securely on the tripod.
Using a remote switch (sold separately,
) or a wireless remote control (sold
separately, ) is recommended.
FAQ
Focusing is not possible (indicated by an orange AF point).
Aim the AF point over an area with good contrast, then press the shutter button halfway
(
). If you are too close to the subject, move away and shoot again.
Multiple AF points are displayed simultaneously.
If multiple AF points are displayed simultaneously, all of these positions are in focus. As
long as one AF point is displayed on the subject, you can take the picture.
Pressing the shutter button halfway does not focus on the subject.
If the lens's focus mode switch is set to < > (manual focus), set it to < >
(autofocus).
The shutter speed display is blinking.
Since it is too dark, taking the picture may result in a blurred subject due to camera
shake. Using a tripod or a Canon EL/EX series Speedlite (sold separately,
) is
recommended.
The bottom of pictures taken with flash is unnaturally dark.
If a hood is attached to the lens, it may obstruct light from the flash. If the subject is
close, detach the hood before taking the picture with flash.
96