Multi-Tech Systems 7500 - Manual (Page 109)

ION 7500 / ION 7600 User’s Guide Changing Setup Registers with Designer
Chapter 4 - Using ION Software Page 109
To configure ION module setup registers with Designer
1. Right-click near the module’s center. The ION Module Setup dialog box
appears, showing a list of setup registers available for configuration.
2. Highlight the Setup register you want to configure, and click Modify.... A
Modify Register dialog box appears.
Make the change to the register’s setting here. As there are different types of data
held in setup registers, there are different Modify Register dialog boxes. The
Modify Register dialog box may require that you choose an option from a list or
enter a numeric value.
A format option is available when modifying Numeric Bounded setup registers.
Clicking Format causes a “Formatted Numeric Value” window to appear:
The list of available Setup
registers appears here.
Select a Setup register,
then click Modify... (or
double click on the Setup
register name).
A drop down list of option
appears when you click
on the arrow because this
setup register is of the
enumerated type.