Multi-Tech Systems 7500 - Manual (Page 364)

Upgrading Your ION Device(s) ION 7500 / ION 7600 User’s Guide
Page 364 Upgrading ION Device Firmware Technical Note
Failure handling is useful when upgrading large numbers of devices. Because
the upgrade process is time-consuming, you may choose to leave the Device
Upgrade utility to operate on its own (e.g. overnight). By setting the failure
handling accordingly, you can instruct the Device Upgrade utility to continue
the upgrade even after encountering problems with one or more devices.
6. In the Select Revision section, click the Select File button. In the Revision File
Selection box, locate the revision file that you want to use, and click Open.
The selected file and revision number are displayed below the Select File button.
This file will be downloaded to all the devices that are highlighted in the Select
Devices to Upgrade list.
7. Click Upgrade to upgrade the selected device(s).
The Upgrade Status box describes each step in the upgrade process, and the Percent
Completed bar indicates the progress of each upgrade. Each completed upgrade is
noted in the Upgrade Status box.
N OTE
If connection to the device is lost, or if power to the device is interrupted during an upgrade, restart the
Device Upgrade utility procedure.