Default front panel display screens, Screens shown in display cycle – Multi-Tech Systems 7500 User Manual

Page 26

Advertising
background image

Default Front Panel Display Screens

ION 7500 / ION 7600 User’s Guide

Page 26

Chapter 2 - Using The Front Panel

Default Front Panel Display Screens

The meter is factory configured to display a number of data screens on its front
panel:

42 display screens for the ION 7500

48 display screens for the ION 7600

Each of these screens is accessible with a corresponding Softkey. See the “Button
Functions” section for instructions on using the front panel buttons for data
display.

N

OTE

Each display screen is listed with the corresponding softkey name and the screen title.

Screens Shown in Display Cycle

Ten data display screens are included in the automatic display cycle. By default,
the front panel scrolls repeatedly through the following screens in the order
presented.

For details on screen type (e.g. three parameter, vector diagram, etc.) refer to the
technical note Custom Front Panel Displays.

1.

V,I,PF (Volts, Amps, PF)

This numeric display screen contains the average line-to-line voltage, average
current, and the total signed power factor.

2.

Volts (Volts)

This numeric display screen shows the line-to-line voltages Vll ab, Vll bc, and
Vll ca.

3.

Amps (Amps)

This is a numeric screen containing currents I a, I b, and I c.

4.

Power (Total Power)

This numeric display screen contains total kW, kVAR, and kVA values.

5.

Energy1 (Energy Delivered)

This numeric display screen shows delivered (imported) energy values for kWh,
kVARh, and kVAh.

6.

Demand1 (Demand Delivered)

This numeric display screen contains delivered values (kW, kVAR, and kVA) in
the previous demand period. By default, these values come from a sliding
window demand (rolling block) calculation.

Advertising
This manual is related to the following products: