Data display and analysis tools – Multi-Tech Systems 7500 User Manual

Page 14

Advertising
background image

The ION meter in an Enterprise Energy Management System

ION 7500 / ION 7600 User’s Guide

Page 14

Chapter 1 - Introduction

The ION meter in an Enterprise Energy Management

System

Applications that include the meter typically require additional equipment.
Display and analysis software tools are almost always used to manage, interpret
and distribute the data measured or logged by a meter. There are usually a variety
of tools used, and often these tools are connected using different communications
standards and protocols. In many cases, a meter must also provide control
capabilities and device-level data sharing.

The meter can adapt to many situations. Advanced communications allow data to
be shared simultaneously across multiple networks, built-in I/O provides
monitoring and control capabilities, and a variety of display and analysis tools can
be used to monitor your power system.

Data Display and Analysis Tools

Not only does the meter’s front panel allow meter configuration and data display,
but the meter also integrates seamlessly with display and analysis software
available from Power Measurement. ION Enterprise software is the network and
device configuration software that also lets you analyze and monitor your system
and produce reports for any department in an organization. Furthermore, you can
use data acquired by the meter in a variety of third-party systems. ION software is
designed to make use of all the available advanced capabilities.

Onboard I/O

On-Site Data Display

Data Analysis Tools

Power System Connections

Communications

Corporate Network

-

-
-

-

RS-232 and high speed RS-485
Internal Modem
Optical infrared
10 Base-T and 10 Base-FL Ethernet
Interoperability
Protocols: ION, Modbus Master, Modbus RTU,

DNP 3.00, ModemGate (modem

to RS-485 gateway), EtherGate (Ethernet
to RS-485 gateway), GPS: Arbiter,
GPS:True Time/Datum

-

-

Modbus TCP,

-
-
-
-

Pulses
Breaker Status
Control Signals
Energy Pulses

Phase voltage, phase current, ground current,
and neutral current from Wye, Delta, or
single-phase power systems

- MeterM@il
- WebMeter functionality
- XML compatibility

Internet Connectivity

N

N

N

-
-

Power Monitoring Network
Third-Party Software for

Modbus, DNP 3.00, Mv90

-

320 by 240 pixel LCD

Remote Data Display

Vista
WebReach

-
-

Advertising
This manual is related to the following products: