Multi-Tech Systems 7500 User Manual
Page 354
![background image](/manuals/116039/354/background.png)
GPS Time Synchronization
ION 7500 / ION 7600 User’s Guide
Page 354
Time Synchronization & Timekeeping Technical Note
Explanation of GPS:ARBITER & GPS:TRUETIME/DATUM ASCII Time String
Explanation of GPS:ARBITER-VORNE ASCII Time String
1
Explanation of <CR> and <LF> is the same as in the previous table.
The bytes in the time string must transmit continuously for the time
synchronization signals to be received correctly. When using a GPS receiver for
time synchronization, it is best to use it at 9600 baud rather than a higher baud rate.
This reduces the chance of bytes being interrupted and provides the best accuracy,
since the accuracy of the OTM depends on the baud rate.
ASCII Time String:
<
SOH
>
DDD
:
HH
:
MM
:
SSQ
<
CR
><
LF
>
<SOH>
start of header (ASCII 01
hex
)
DDD
day of the year
HH
hours
MM
minutes
SS
seconds
Q
quality flag
<CR>
carriage return (ASCII 0D
hex
)
<LF>
line feed (ASCII 0A
hex
)
ASCII Time String (below left)
1
44HHMMSS<CR><LF>
UTC/local time
55DDD<CR><LF>
day of the year
11NN<CR><LF>
out-of-lock time in minutes
<BEL>
<
BEL
> = hex 07