Multi-Tech Systems 7500 - Manual (Page 152)

Logging Configurations for ION 7500 Revenue Applications ION 7500 / ION 7600 User’s Guide
Page 152 Chapter 5 - Features and Applications
Logging Configurations for ION 7500 Revenue Applications
You can alter the logging capacity of your ION 7500 meter, if it is being used for
revenue applications. A suggested configuration is shown in the table below. To
make use of the suggested revenue logging configuration, you must make all of the
changes outlined below.
The following configuration does not apply to the ION 7600 meter, as it has a
specific Revenue Log (see Chapter 2 for more details). This configuration is for an
ION 7500 with standard 1Mb log memory.
Log Depth Interval ION Modules Requiring Settings Changes
Revenue Log 760 35 days
Data Recorder module “Revenue Log”
Periodic Timer module “Revenue Log Trg”
Loss Log 760 35 days
Data Recorder module “Loss Log”
Periodic Timer module “Loss Log Trg”
Time Of Use
Data Recorders
20
Triggered
on demand
No changes required
Historic Logs 192 2
Data Recorder modules “Hist mean Log,” “Hist
high Log,” and “Hist low Log”
Periodic Timer module “Hist Log Trig”
Harmonics Logs 48 2
Data Recorder modules “Harm mean Log” and
“Harm high Log”
Periodic Timer module “Harm Log Trig”
Waveform recording 5
Triggered
on demand
Data Recorder module “EgyDmd Log”
Report Generator Log 192 2
Data Recorder module “EgyDmd Log”
Periodic Timer module “EgyDmd Log Trig”
Sag/Swell Log 100
Triggered
on demand
No changes required
Event Log 500
Triggered
on demand
No changes required