Multi-Tech Systems 7500 - Manual (Page 278)

Enabling/Disabling Meter Web Server Functionality ION 7500 / ION 7600 User’s Guide
Page 278 WebMeter Internal Web Server Feature Technical Note
Enabling/Disabling Meter Web Server Functionality
You can enable/disable the web server functionality of the meter with Designer
software. Refer to the following instructions to learn how to enable/disable web
server functionality with Designer software.
N OTE
Depending on the meter, web server functionality of the meter may be enabled by default.
Enabling/disabling web server functionality of the meter:
The steps are the same for enabling or disabling web server functionality of the
meter; in step 3 you select either option.
1. Open the meter in Designer and double-click on the Communications Setup
folder. The screen that appears contains shortcuts to several Communications
modules and one Ethernet module.
2. Right-click on the icon in the center of the Ethernet module. The ION Module
Setup screen appears.
3. Double-click the Enable Webserver setup register and change the value to “Yes”
or “No.”
4. Click Send and save.