Multi-Tech Systems 7500 - Manual (Page 337)

®
TECHNICAL NOTE
The ION ® Meter as an Ethernet Gateway
You can use your meter to let ION or other supported protocol data pass through
the meter to other networks including third party systems. This technical note
describes how to use your ION meter as a gateway.
In This Document
EtherGate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
Step 1: Install the Gateway Meter and Serial Network Devices . . . . . . . . . . . . . 339
Step 2: Add the ION Gateway Meter to Your ION Enterprise Network . . . . . . 339
Step 3: Add an EtherGate Site to Your ION Enterprise Network . . . . . . . . . . . . 339
Step 4: Add Serial Devices to the ION Enterprise Ethernet Gateway Site . . . . 340