Konica Minolta bizhub 750 - Manual (Page 104)

Basic Copy Operations 3
bizhub 750/600 3-5
Ba
sic Copy Op
er
ations
Chapter 3
3.2 Operations That Cannot Be Combined
Certain copy settings cannot be used together.
Specifying settings that cannot be combined will result in one of the follow-
ing.
- The setting specified last is given priority. (The setting specified first is
canceled.)
- The setting specified first is given priority. (A warning message appears.)
Operations where the setting specified last is given priority
As an example, the procedure for setting the “Booklet” function after select-
ing the “2 Position” Staple setting is described below.
1
Select the “2 Position” Staple setting.
2
Set the “Booklet” function.
The “2 Position” Staple setting is automatically cancelled, and the
“Booklet” function is set.
To select the “2 Position” Staple setting, cancel the “Booklet” function,
and then select the “2 Position” setting.