Konica Minolta bizhub 750 - Manual (Page 95)

2 Before Making Copies
2-50 bizhub 750/600
Before Making C
o
pies
Chapter 2
4
Repeat steps 2 and 3
until the bottom plate
cannot be lowered any
further.
5
Close the upper door of the large capacity tray.
2
Reminder
Do not load the LCT with paper of other sizes than previously specified.
Do not load so much paper that the top of the stack does not exceed
the
, mark.
Make sure that the trailing-edge guide is adjusted to fit the size of the
loaded paper. If there is space between the trailing-edge guide and the
paper, the paper will not be fed correctly.
(LU-401)
(LU-402)