Konica Minolta bizhub 750 User Manual
Page 435
12
Utility
12-22
bizhub 750/600
Utility
Ch
ap
te
r 12
2
Note
[Auto Booklet ON When Fold & Staple] is available only if optional finisher
FS-602 is installed.
[Auto Zoom(Platen)], [Auto Zoom(ADF)], [Select Tray when APS OFF],
[Select Tray for Insert Sheet], [Exit Direction Of 1 Sheet(Platen)] and [Tri-
Fold Printed Side Selection] appear only if the “Administrator Security
Level” parameter (displayed from the Administrator Setting screen) is set
to “Level 1” or “Level 2”.
[Tri-Fold Printed Side Selection] is available only if optional finisher FS-
602 is installed.
[Print Jobs During Copy Operation] appear only if the “Administrator Se-
curity Level” parameter (displayed from the Administrator Setting screen)
is set to “Level 2”.
!
Detail
For details on the “Administrator Security Level” parameter, refer to “Se-
curity Setting” on page 12-37.
Exit Direction Of 1
Sheet(Platen)
Select the orientation in which copies of
documents placed on the original glass
are fed out.
• Face Down: Copies are fed out print-
ed side down.
• Face Up: Copies are fed out printed
side up.
Face Down/ Face Up
Tri-Fold Printed Side Se-
lection
Select whether the printed side is on the
inside or the outside when the page is
folded in three.
Outside/ Inside
Print Jobs During Copy
Operation
Select whether or not print data can be
accepted for printing while a copy oper-
ation is being performed.
• Accept:
Print data can be accepted and print-
ed.
• Receive Only:
Print data is printed after the copy op-
eration is finished.
• Do Not Accept:
Print data is not received.
Accept/ Receive Only/
Do Not Accept
Parameter
Description
Settings (Default set-
tings are underlined.)