Konica Minolta bizhub 750 - Manual (Page 55)

2 Before Making Copies
2-10 bizhub 750/600
Before Making C
o
pies
Chapter 2
4
3
4
3
1
1
5
9
2
5
8
7
6
2
10
10
11
11
Finisher FS-602
Finisher FS-504
+Punch Kit PK-505
No. Part Name Description
1 Inlet lever Lowered when clearing paper misfeeds
2 Punch kit (optional) Punches holes for filing printed pages when the
punch kit is installed onto finisher
3 Cover sheet conveyance lever Moved to the left when clearing paper misfeeds
4 Sub tray conveyance lever Moved to the right when clearing paper misfeeds
5 Stacker conveyance lever Moved down and to the left when clearing paper
misfeeds
6 Lower lever Moved to the left after pulling out the stacker unit
when clearing paper misfeeds
7 Knob Turned when clearing paper misfeeds
8 Stacker unit Mounts the stapler. Also includes the equipment for
folding in half and in three and for center binding on
FS-602.
9 Punch dust box (optional) Removed when emptying punch dust that has ac-
cumulated from using the Punch settings (See
p. 9-15.)
10 Stacker unit handle Used to pull out the unit when clearing paper mis-
feeds in the stacker unit and when refilling the sta-
ples
11 Staple cartridge Removed when refilling the staples (See p. 9-7.)