Konica Minolta bizhub 750 - Manual (Page 276)

Application Functions 8
bizhub 750/600 8-3
Application F
unctions
Chapter 8
To copy using the “OHP Interleave” function
0 Finishing settings, such as the Staple, Punch and Folding settings, can-
not be used. The copies are fed into the main tray of optional finisher FS-
504/FS-602.
With the “OHP Interleave” function, the original cannot contain pages of
mixed sizes.
0 The Finishing setting cannot be changed.
0 The number of copies is set to “1” and cannot be changed.
0 One interleaf will be inserted between overhead projector transparencies.
0 Load the overhead projector transparencies into the bypass tray one at a
time in the
v orientation.
0 Specify that the overhead projector transparencies are loaded into the
bypass tray. For details, refer to “Order for Selecting the Paper Trays” on
page 7-7.
1
Position the original to be copied.
– For details on positioning the original, refer to “Positioning the Orig-
inal” on page 3-7.
2
Position overhead projector transparencies into the bypass tray.
– Use interleaf paper with the same size as the overhead projector
transparencies, and load them in the
v orientation.
– For details on loading paper into the bypass tray, refer to “Loading
Paper Into the Bypass Tray” on page 2-44.
3
Select “OHP” for the paper in the bypass tray.
Touch [Paper] in the Basic screen, touch the button for the bypass tray,
touch [Change Tray Settings], and then touch [OHP].
4
Touch [OK].
The Paper screen appears.