Konica Minolta bizhub 750 - Manual (Page 440)

Utility 12
bizhub 750/600 12-27
Utility
Ch
ap
te
r 12
2
Note
[Print/Fax Output Setting] appears only if optional printer controller IC-
202 is installed.
The “Exit Tray Setting” parameter is available only if optional finisher FS-
504/FS-602 is installed.
Date/Time Setting
Daylight Saving Time Setting
Weekly Timer Setting
Description Settings (Default set-
tings are underlined.)
Specify the date, time and time zone for the machine’s internal clock. Time Zone: -12:00 to
13:00 00:00
Description Settings (Default set-
tings are underlined.)
Select whether or not the machine’s internal clock observes daylight
saving time, and specify the daylight saving time. ON/ OFF
Daylight Savings Time: 1
to 150 minutes: 60 min-
utes
Parameter Description Settings (Default set-
tings are underlined.)
Weekly Timer ON/OFF
Setting Select whether or not the weekly timer is
used. ON/ OFF
Time Setting Specify the time of each day that the ma-
chine is turned on/off by the timer. –
Date Setting Specify the individual dates or the days
of the week that the machine is turned
on/off by the timer. –
Select Time for Power
Save Specify the time that the machine is
turned off/on when it has been turned on
by the weekly timer. ON/ OFF
Password for Non-Busi-
ness Hours Select whether or not the machine can
be used after a password is entered
when the machine has been turned off
by the weekly timer. ON/ OFF