Konica Minolta bizhub 750 - Manual (Page 210)

Additional Copy Operations 4
bizhub 750/600 4-35
Addition
al Copy Op
era
tions
Chapter 4
To set the “Touch Panel Adj.” function
If the touch panel buttons do not respond correctly, the position of buttons
in the touch panel may not be correctly aligned with the position of the actual
touch sensor and may need to be adjusted.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 4-23)
2
Touch [Touch Panel Adj.] or press the [5] key in the keypad.
The Touch Panel Adjust-
ment screen appears.
? Why does the ma-
chine not respond
when [Touch Panel
Adj.] is touched?
The touch sensors
are not aligned on
the touch panel.
% Press the [5] key in
the keypad.