Konica Minolta bizhub 750 User Manual
Page 110
Basic Copy Operations
3
bizhub 750/600
3-11
Ba
sic Copy Op
er
ations
Chapter 3
Scanning the Original in Separate Batches (“Separate Scan” Setting)
A large original can be divided and scanned in a number of batches.
A maximum of 100 original pages can be loaded into the ADF at one time.
However, by copying with the “Separate Scan” setting, an original that ex-
ceeds 100 pages can be scanned and treated as a single copy job. In addi-
tion, the scanning location can be switched between the original glass and
the ADF during the scanning operation.
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the
, mark, otherwise an original misfeed or damage
to the original may occur.
1
Position the original to be copied.
–
When using the original glass, place the first page of the original on
the original glass with the side to be copied facing down.
–
When using the ADF, load the original with the pages in order and
the first page on top. Up to 100 sheets can be loaded at one time.
2
In the Basic screen, touch [Separate Scan].
–
To cancel the “Separate Scan” setting, touch [Separate Scan] again
to deselect it.