Konica Minolta bizhub 750 - Manual (Page 52)

Before Making Copies 2
bizhub 750/600 2-7
Before Making C
o
pies
Chapter 2
No. Part Name Description
1 Main body The original is scanned by the scanner section, and
the scanned image is printed by the printer section.
Referred to as the “machine” or “main body”
throughout the manual.
2 Shift tray SF-601 Separates copies fed out at an offset
3 Cover sheet feeder PI-501 Allows cover sheets to be inserted into copies if in-
stalled onto finisher FS-504/FS-602, and allows the
functions of installed finishers to be used manually
4 Punch kit PK-505 Allows hole punching to be used if installed onto fin-
isher FS-504/FS-602
Referred to as the “punch kit” throughout the man-
ual.
5 Finisher FS-504 Feeds out printed pages. The “Sort”, “Group”, “Off-
set” + “Sort”, “Offset” + “Group”, “Face Up” and
Staple settings are available.
6 Finisher FS-602 Feeds out printed pages. The “Sort”, “Group”, “Off-
set” + “Sort”, “Offset” + “Group”, “Face Up”, Sta-
ple, “Fold & Staple”, “Half Fold” and “Tri-Fold”
settings are available.
7 Z-folding unit ZU-602 Allows holes to be punched for filing and allows
pages to be folded in a zigzag if installed onto fin-
isher FS-504/FS-602
8 Large capacity tray LU-402 Can be loaded with up to 4,000 sheets of paper
(20lb)
Referred to as the “LCT” throughout the manual.
9 Large capacity tray LU-401 Can be loaded with up to 4,000 sheets of paper
(20lb)
Referred to as the “LCT” throughout the manual.
10 Key counter Controls the number of copies produced
11 Hard disk drive HD-503 Increases the number of original pages that can be
stored and enables the “Set Numbering” and Box
functions to be used
Referred to as the “hard disk” or “HDD” throughout
the manual.
12 Printer controller IC-202 Allows this machine to be used as a network printer
(optional)
13 Local interface kit EK-701 Used for making a local connection between this
machine and the computer