Konica Minolta bizhub 750 - Manual (Page 334)

Application Functions 8
bizhub 750/600 8-61
Application F
unctions
Chapter 8
8.11 Adjusting the Image To Fit the Paper (Image Adjust-
ment Settings)
The position of the copy image can be adjusted in order to print the copies.
The following Image Adjustment settings are available and can be combined.
!
Detail
Normally, copies are produced with the image erased from the area 1/8
in from the top, 1/6 in from the bottom, and 1/16 in on each side. If “Full
Scan” is selected, the image is copied to the edges of the paper without
erasing the areas mentioned above.
Setting Description
Centering The copy is printed with the image positioned in the center of the paper.
No Rotation The copy is printed without the image rotated to fit in the paper.
Full Scan The copy is printed without margins at the edges of the paper. This allows
the original to be copied with no loss if text is written to the edge of the
paper.