Konica Minolta bizhub 750 User Manual
Page 343
Advertising
8
Application Functions
8-70
bizhub 750/600
Application F
unctions
Chapter 8
To erase specified areas of copies (“Erase” function)
By using the “Erase” function, the unwanted areas around the original can be
erased.
The same width erased along all four sides of the original can be specified,
or a different width to be erased can be specified for each side of the original.
1
Position the original to be copied.
–
For details on positioning the original, refer to “Positioning the Orig-
inal” on page 3-7.
2
Touch [Application].
The Application screen appears.
3
Touch [Erase].
–
To cancel all settings for the Application functions, touch [Reset].
The Erase screen appears.
Advertising