Konica Minolta bizhub 750 User Manual
Page 364
Application Functions
8
bizhub 750/600
8-91
Application F
unctions
Chapter 8
3
Touch [Print Position], and then select the printing position.
–
To make fine adjustments to the printing position, continue with
step 4.
–
To not make fine adjustments, skip to step 6.
4
Touch [Change Adjustment].
–
Select the desired direction under “Left & Right Adjustment” or
“Top & Bottom Adjustment”, and then use the keypad or touch [-]
and [+] to specify the adjustment amount.
–
When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
If a value outside the allowable range is specified, the message “In-
put Error” appears.
If “Input Error” appeared or if the distance was incorrectly entered,
press the [C] (clear) key to erase the value, and then specify the cor-
rect value.
5
Touch [OK] four times.
6
If necessary, specify any other copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.