Konica Minolta bizhub 750 - Manual (Page 307)

8 Application Functions
8-34 bizhub 750/600
Application F
unctions
Chapter 8
– Touch [
↔] to switch between the integer and the fraction, touch
[–] and [+] to specify the width to be erased, and then touch [OK].
– If a decimal value is displayed in the screen, use the keypad to type
in the setting. For details on switching between decimal and frac-
tion values, refer to “System Setting” on page 12-14.
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
– If a value outside the allowable range is specified, the message “In-
put Error” appears. If “Input Error” appeared or if the distance was
incorrectly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.
– If a Book Erase function is specified, touch [Image Adjustment] in
the Application screen, touch [Standard Size], and then specify the
size of the original.
? What do the Book Erase functions do?
% “Erase” and “Center Erase” can be used together.
? How are settings specified for the “Erase” function?
% Refer to “Erasing Specified Areas of Copies (“Erase” Functions)” on
page 8-69. In addition.
Erase screen
Center Erase screen