Utility ch ap te r 12 – Konica Minolta bizhub 750 User Manual

Page 429

Advertising
background image

12

Utility

12-16

bizhub 750/600

Utility

Ch

ap

te

r 12

Reset Setting

Parameter

Description

Settings (Default set-
tings are underlined.)

System Auto Reset

Specify the desired length of time until
the automatic system reset operation is
performed.
• Priority Mode:

Select the setting for the mode that
the machine enters when the auto-
matic system reset operation is per-
formed.

• System Auto Reset Time:

Specify the setting for the desired
length of time until the automatic sys-
tem reset operation is performed.

Priority mode:
Copy/ Scan
System Auto Reset
Time:
OFF/ 1 to 9 minutes:
1 minute

Auto Reset

Select the setting for the desired length
of time until the automatic panel reset
operation is performed for each mode.

Copy: OFF/ 1 to 9 min-
utes: 1 minute
Scan: OFF/ 1 to 9 min-
utes: 1 minute

Job
Reset

When ac-
count is
changed

Select whether or not the settings are re-
set when the user has changed.
This machine detects that the user has
changed when the optional key counter
has been removed or when the [Access]
key is pressed after entering user au-
thentication and account track informa-
tion.

Reset/ Do Not Reset

When orig-
inal is set
on ADF

Select whether or not the settings are re-
set when a document is loaded into the
ADF.

Reset/ Do Not Reset

When Next
Job is se-
lected

Staple Setting:
Select whether the same Staple setting
from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied.

ON/ OFF

Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Margin settings from the previ-
ous job are set or the settings are
canceled when that job begins and the
settings for the next job can be speci-
fied.

ON/ OFF

Reset Data After Job:
Select whether the same settings for a
scan operation from the previous job are
set or the settings are canceled when
that job is completed and the settings for
the next job can be specified. (However,
even if “OFF” is selected, the destination
is cleared.)

ON/ OFF

Advertising