Konica Minolta bizhub 750 User Manual
Page 431
12
Utility
12-18
bizhub 750/600
Utility
Ch
ap
te
r 12
Output Setting
2
Note
[Output Setting], [Date/Time Setting], [Daylight Saving Time Setting] and
[Original Image Density] appear only if the “Administrator Security Level”
parameter (displayed from the Administrator Setting screen) is set to
“Level 2”.
[Print/Fax Output Setting] appears only if optional printer controller IC-
202 is installed.
The “Exit Tray Setting” parameter is available only if optional finisher FS-
504/FS-602 is installed.
Date/Time Setting
Daylight Savings Time Setting
Parameter
Description
Settings (Default set-
tings are underlined.)
Print/Fax Output Setting
Specify settings for printing. For details, refer to the IC-202 User’s
Guide.
Exit Tray Setting
Specify the exit tray given priority with
each function (copying, printing and out-
putting reports).
Copy: Main Tray/ Sub
Tray
Printer: Main Tray/ Sub
Tray
Reports Print: Main Tray/
Sub Tray
Description
Settings (Default set-
tings are underlined.)
Specify the date, time and time zone for the machine’s internal clock.
Time Zone: -12:00 to
13:00 00:00
Description
Settings (Default set-
tings are underlined.)
Specify whether or not the machine’s internal clock observes day-
light saving time, and set the daylight saving time.
ON/ OFF
1 to 150 minutes: 60
minutes