Konica Minolta bizhub 750 - Manual (Page 427)

12 Utility
12-14 bizhub 750/600
Utility
Ch
ap
te
r 12
12.3 Specifying User Settings
This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [2 User Set-
ting].
System Setting
Language Selection
Measurement Unit Setting
Paper Tray Setting
Description Settings (Default set-
tings are underlined.)
Select the language of the Touch Panel messages. English/French/Spanish/
Japanese
Description Settings (Default set-
tings are underlined.)
Select one of the measurement units in which values are displayed
in the touch panel. mm (Numerical Value)/
inch (Numerical Value)/
inch (Fraction)
Parameter Description Settings (Default set-
tings are underlined.)
Paper
Type Paper
Type Select one of the types for paper loaded
into each paper tray. Normal/ Thick Paper/
Thin Paper/ Custom 1/
Custom 2/
Custom 3/ Tab Paper/
Recycled/ Colored Pa-
per/Special Paper/ Fine/
Label/ Letterhead
Paper Size Select one of the following sizes for pa-
per loaded into the tray 3 and 4.
• Standard Size 1: The size of standard-
sized paper is automatically detected.
• Standard Size 2: Select when loading
paper of the following sizes: A4
w , A5
v, F4.
• Custom Size: Select when using cus-
tom-sized paper.
• Oversized Paper: Select when paper
larger than a standard size is being
used.
Standard Size 1/
Standard Size 2/
Custom Size/
Oversized Paper