Konica Minolta bizhub 750 - Manual (Page 289)

8 Application Functions
8-16 bizhub 750/600
Application F
unctions
Chapter 8
8.4 Inserting Cover Pages (“Insert Sheet” Function)
Paper different from the copy is used to add insertions at the specified loca-
tions.
There are settings (“Copy” and “Blank”) for selecting whether or not the in-
serted pages are printed. Depending on the selected settings, the original is
copied as shown below.
If “11” is specified as an insertion page with “Copy” selected
If “11” is specified as an insertion page with “Blank” selected
1-Side/2-
Sides Setting Description
“1 > 1” The 11th page of the original is copied onto insertion paper that is in-
serted as the 11th page of the copy.
“1 > 2” The 11th and 12th pages of the original are copied onto insertion paper
that is inserted as the 6th page of the copy. When “12” is specified, this
results in the same.
“2 > 2” The 11th page of the original is copied onto insertion paper that is in-
serted as the 11th page of the copy.
“2 > 1” Only the front side of the 6th page of the original is copied onto inser-
tion paper that is inserted as the 11th page of the copy.
1-Side/2-
Sides Setting Description
“1 > 1” A blank page is inserted as the 12th page of the copy.
“1 > 2” The 11th page of the original is copied as the front side of the 6th page
of the copy and a blank page is inserted as the 7th page of the copy.
“2 > 2” A blank page is inserted as the 12th page of the copy.
“2 > 1” The front side of the 11th page of the original is copied as the 6th page
of the copy and a blank page is inserted as the 7th page of the copy.