Konica Minolta bizhub 750 - Manual (Page 111)

3 Basic Copy Operations
3-12 bizhub 750/600
Ba
sic Copy Op
er
ations
Chapter 3
3
Press the [Start] key.
– Repeat this step until all pages of the original have been scanned.
– The amount of memory available can be checked beside “Memory”
in the upper-right corner of the Basic screen.
– To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to “Stopping Scanning/Printing” on
page 3-74.
After the original is scanned, the message “Scanning stopped. Press
[Start] to continue.” appears.
4
After all original pages have been scanned, touch [Finish].
5
Press the [Start] key.