4 specifying administrator settings, Utility ch ap te r 12 – Konica Minolta bizhub 750 User Manual
Page 439
12
Utility
12-26
bizhub 750/600
Utility
Ch
ap
te
r 12
12.4
Specifying Administrator Settings
This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [3 Administra-
tor Setting].
System Setting
Power Save Setting
Output Setting
Parameter
Description
Settings (Default set-
tings are underlined.)
Low Power Mode Set-
ting
Specify the desired length of time until
the machine enters Low Power mode.
1 to 240 minutes: 15
minutes
Sleep Mode Setting
Specify the desired length of time until it
enters Sleep mode.
OFF/ 1 to 240 minutes:
90 minutes
Power Save Key
Select which low power mode is entered
when the [Power Save] key is pressed.
• Low Power:
The touch panel goes off and the ma-
chine enters a mode where it con-
serves energy.
• Sleep:
Although the machine conserves
more energy in Sleep mode than in
Low Power mode, the machine must
warm up when Sleep mode is can-
celed, therefore taking more prepara-
tion time than Low Power mode.
Low Power/ Sleep
Parameter
Description
Settings (Default set-
tings are underlined.)
Print/Fax Output Set-
tings
Specify settings for printing. For details, refer to the IC-202 User’s
Guide.
Exit Tray Setting
Select the copy exit tray for each type of
job (copies, printouts and reports).
Copy: Main Tray/ Sub
Tray
Printer: Main Tray/ Sub
Tray
Reports Print: Main Tray/
Sub Tray