Konica Minolta bizhub 750 User Manual
Page 475
Advertising
12
Utility
12-62
bizhub 750/600
Utility
Ch
ap
te
r 12
7
Touch the button for setting to be specified.
8
Touch [Test Copy].
The Test Copy screen appears.
9
Press the [Start] key.
The sample copy is printed.
10
Touch [Close].
The Punch Regist Loop Size screen appears again.
11
Check the punch positions in the sample copy.
12
If the desire print results are not achieved, change the adjustment val-
ue.
–
If the positions of the punched holes are not aligned on the paper,
touch [+] and [–] to increase or decrease the adjustment (between
–16.0 mm and 16.0 mm).
If the adjustment value is large, the edge of the paper may become
folded.
Advertising