Konica Minolta bizhub 750 - Manual (Page 181)

4 Additional Copy Operations
4-6 bizhub 750/600
Addition
al Copy Op
era
tions
Chapter 4
– The number under “Number of Sets” in the screen that appeared
when a sample copy is printed indicates the number of copies that
are sample copies/total number of copies specified.
The Change Setting screen appears.
6
In the Change Job Setting screen, change the copy settings as desired,
and then touch [OK].
– To change a value, press the [C] (clear) key, and then use the key-
pad to type in the new value.
? Can the copy settings be changed?
% The following copy settings can be specified after a sample copy is
printed.
# of Sets, 1-Sided/2-Sided, Finishing, Folding, Page Margin,
Stamp/Overlay, Cover Mode, Insert Sheet, Chapters
? How are changes to the copy settings canceled?
% Touch [Cancel].
? Why is the button for the setting that I wish to change not dis-
played?
The copy setting cannot be changed.
% If the copy settings cannot be changed, stop printing the proof
copy. Then, press the [Reset] key to cancel the copy settings, and
then specify the desired settings.