Konica Minolta bizhub 750 - Manual (Page 411)

11 Managing Jobs (Job List)
11-18 bizhub 750/600
M
a
na
gin
g
Jo
bs
(
J
ob
L
ist
)
Ch
ap
te
r 11
To increase priority for printing
The next job to be printed after the current job being printed can be selected.
If an Administrator mode function was set so that the output priority of jobs
cannot be changed, [Increase Priority] does not appear and the output prior-
ity of the jobs cannot be specified.
If the job currently being printed can be interrupted, printing is interrupted
and printing of the job given priority begins. Printing of the interrupted job is
automatically restarted once printing for the job given priority is finished.
If the job currently being printed cannot be interrupted (a job has already
been interrupted or a job was already given priority), printing is interrupted
after printing for the current job is finished.
1
Display the Active Jobs list in the Current Jobs list of the Print tab.
2
Touch [Increase Priority].
The Increase Priority screen appears.
3
In the job list, touch the button for the job to be given priority to select
it, and then touch [OK].
– If the job to be given priority is not displayed, touch [ ] and [ ]
until the desired job is displayed.
– If an incorrect job was selected, select a different job or touch the
button for the selected job again to deselect it.