Konica Minolta bizhub 750 - Manual (Page 442)

Utility 12
bizhub 750/600 12-29
Utility
Ch
ap
te
r 12
Expert Adjustment
Parameter Description Settings (Default set-
tings are underlined.)
Original Image Density Specify the initial density of the quality of
the document. A density can be speci-
fied for each Orig. Image Type setting. Text:
0 (light) to 5 (dark): 3
Text/Photo:
0 (light) to 5 (dark): 3
Dot Matrix Original:
0 (light) to 5 (dark): 2
Photo:
0 (light) to 5 (dark): 1
Erase Ad-
justment Non Im-
age Area
Erase Specify the conditions for erasing the
area framing the document.
• Always: No limits are specified.
• Only When Auto size or ×1.0 is select-
ed: The frame around the document is
erased only if the “Auto Zoom” or
“×1.0” Zoom settings are selected.
• Do Not Erase When ×1.0 is selected:
The frame around the document is
erased only if a Zoom setting other
than “×1.0” is selected.
Always/ Only When Auto
size or ×1.0 is selected/
Do Not Erase When ×1.0
is selected
Non Im-
age Area
Erase Set-
ting Select whether the areas framing docu-
ments are erased.
• Auto: The frame is erased automati-
cally.
• Specify: Select the erasing method
and the document density. In addi-
tion, the density can be adjusted to
one of five levels.
Auto/ Specify
How to Erase:
Diagonal Erase/
Square Erase
Original Density:
1 (light) to 5 (dark):
3(Std.)
ADF Frame
Erase Specify the frame width that is erased
when using the ADF. 0 to 5 mm: 3 mm
Printer Ad-
justment Leading
Edge
Adjust-
ment The starting print position at the leading
edge of the paper (with respect to the
paper feed direction) can be adjusted in
0.1 mm increments. Adjustments can be
specified for each paper type. Normal: –3.0 to 6.0 mm:
0.0 mm
Thick paper: –3.0 to 6.0
mm: 0.0 mm
Centering The starting print position at the left edge
of the paper (with respect to the paper
feed direction) can be adjusted in 0.1
mm increments. – 6.4 to 6.3 mm: 0.0 mm
Vertical
Adjust-
ment If the copy image is distorted (stretched or compressed), the paper
feed speed and printing speed can be synchronized to adjust the
copy image. For details on making this adjustment, contact your
technical representative.
Horizontal
Adjust-
ment If the copy image is distorted (stretched or compressed), the zoom
ratio in the transverse document feed direction can be adjusted. For
details on making this adjustment, contact your technical represent-
ative.
2nd-Side Size Adjust-
ment The 2nd-side size can be adjusted for
each tray. Tray 1 to 4, Bypass, LCT
key: No Selection/
– 0.1%/ – 0.2%/ – 0.3%