Konica Minolta bizhub 750 - Manual (Page 244)

Copy Paper/Original 7
bizhub 750/600 7-7
Copy Paper/Original
Chapter 7
Automatic Tray Switching Feature
If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional large capacity tray LU-401/LU-402 is installed, a maximum of 7,600
copies (with 8-1/2 × 11
v (20lb) paper) can be made continuously. (The paper
tray is automatically switched only if the “ATS Permission” parameter in the
Utility mode is set to “Permit”.)
Operating Conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- Paper trays that are selected when the paper tray is automatically
switched.
!
Detail
For details on the specifying the paper trays that are selected when the
paper tray is automatically switched, refer to “System Setting” on
page 12-14.
Order for Selecting the Paper Trays
When a different paper tray is automatically selected, the next paper tray is
chosen from the priority list specified using the “Auto Tray Select Setting”
parameter of Utility mode.
!
Detail
To change the order in which the paper trays are selected, refer to “Sys-
tem Setting” on page 12-14.