Konica Minolta bizhub 750 User Manual
Page 348
Application Functions
8
bizhub 750/600
8-75
Application F
unctions
Chapter 8
9
Press the [Start] key.
To erase specified areas of copies (“Non-Image Area Erase” function)
The size of the original placed on the original glass is detected, and any area
not part of the original is erased.
0 Place the original on the original glass. Do not position the original into
the ADF.
1
Place the document on the original glass.
–
For details on positioning the original, refer to “Positioning the Orig-
inal” on page 3-7.
–
Be sure to fully open the ADF before making copies, otherwise the
copies will not be produced correctly.
2
Touch [Application].
The Application screen appears.
3
Touch [Erase].
–
To cancel all settings for the Application functions, touch [Reset].
The Erase screen appears.