Konica Minolta bizhub 750 User Manual
Page 378
Advertising
Replacing Toner Cartridges and Staples and Emptying Dust Boxes
9
bizhub 750/600
9-13
Replacing Toner
Cart
ridges and
Staples and
Emptying Dust Boxes
Chapter 9
5
Load the new cartridge
case into the staple car-
tridge.
–
Align the side of the
staple cartridge
marked by the arrow
with the side of the
cartridge case
marked by the arrow,
and then fully insert
the staple cartridge.
–
Carefully pull the seal
off the cartridge
case.
6
Install the staple cartridge.
–
Place the staple car-
tridge on the rails,
and then guide it
back to its original
position.
–
Push down the sta-
ple cartridge, and
then check that the
cartridge is securely
installed.
1
2
Advertising