Konica Minolta bizhub 750 - Manual (Page 483)

12 Utility
12-70 bizhub 750/600
Utility
Ch
ap
te
r 12
Cover Sheet Tray Size
Adjust the cover sheet tray size if the paper cannot be detected correctly or
if one side of the cover sheet feeder is adjusted.
0 This parameter is available only if cover sheet feeder PI-501 is installed.
1
Display the Administrator Setting screen.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [7 Cover Sheet Tray Size].
The Cover Sheet Tray Size screen appears.
6
Touch the button for the paper tray to be adjusted.
7
Load A4
w -size paper into the selected paper tray.
8
Press the [Start] key.
– Adjust the cover sheet feeder tray.
9
To adjust the other paper tray , repeat steps 6 through 8.
10
Touch [Close].
– The Finisher Adjustment screen appears again.